plumbing maintenance Archives

Whether you’re rinsing off the desert dust after a long day or running multiple appliances at once, good water pressure makes a big difference in your daily comfort. In Las Vegas, where heat and hard water can both take a toll on your plumbing system, you may often deal with inconsistent or frustratingly low water pressure.

Maintaining proper water pressure protects your system and ensures that everything operates correctly in your home. Failure to do so can stress your pipes and appliances, potentially damaging your water heater. If you’re experiencing uneven pressure, frequent fixture issues, or slow water flow, these five tips will help you maintain consistent, healthy water pressure in your Las Vegas home.

1. Check Your Pressure and Know What’s Normal for Your Home

One of the most crucial and often overlooked ways to maintain optimal water pressure is to understand the ideal water pressure for your home. The water pressure should fall between 40 and 80 PSI (pounds per square inch). This knowledge empowers you to take control of your plumbing system, ensuring it delivers the correct pressure when no water is running and when taps or appliances are in use.

In Las Vegas, where municipal water sources fluctuate based on usage and season, your pressure may vary more than in other parts of the country. If your reading is consistently too high or too low, it’s a good idea to have a plumber from our team inspect your pressure regulator or main supply valve.

2. Maintain Your Pressure Regulating Valve (PRV)

Most modern Las Vegas homes have a pressure regulating valve, or PRV, installed near the main water shut-off. This valve manages the high pressure that often comes from the city’s water lines and reduces it to a safe level for residential use. If the PRV becomes damaged, misadjusted, or worn out, you’ll notice it in your water pressure and possibly in your water bill as well.

Over time, these valves can degrade, especially with exposure to hard water deposits, which are common in the Las Vegas Valley. A malfunctioning PRV may either allow too much pressure into your plumbing or restrict water flow to a trickle. If your home suddenly experiences wildly fluctuating water pressure, you hear banging pipes, or you notice signs of stress on fixtures, it may be time to replace the PRV. One of our licensed plumbers can test the valve’s performance and make adjustments to keep your system balanced and safe.

3. Address Mineral Buildup and Hardwater Issues

Hard water, rich in calcium and magnesium, defines most of the water supply in Las Vegas. These minerals leave behind scale and sediment inside pipes, fixtures, and appliances. Over time, this buildup narrows the interior of your plumbing lines, reducing water flow and causing lower water pressure, especially in older homes.

If you’ve noticed a gradual decline in water pressure over the years or frequently need to descale showerheads and faucet aerators, hard water may be the root cause. Installing a whole-home water softener or a filtration system can significantly reduce scale buildup and improve water flow throughout your plumbing system.

If your home is more than 15 to 20 years old, it’s also worth having Loyalty Plumbing inspect your pipes. In some cases, we may need to flush, clean, and replace sections of pipe to restore proper flow and pressure. Routine maintenance, such as descaling appliances and flushing your water heater, can also prevent pressure issues caused by sediment buildup. We recommend scheduling a maintenance session once a year for your plumbing system.

4. Frequently Check for Hidden Leaks and Blockages

The supply side does not always create water pressure problems. Sometimes, hidden leaks or internal blockages can affect the water flow through your system. A small leak behind a wall or underground can drastically lower water pressure in parts of your home. In fact, the water pressure can become even lower when multiple fixtures are in use.

Signs of a hidden leak in your home include:

Sudden high water bills
Damp spots on floors or walls
Mold growth or mildew smells
Dripping sounds when water isn’t running

On the other hand, partial blockages from rust, debris, or hard water scale can affect individual lines or fixtures. If you notice poor pressure from just one sink, faucet, or showerhead, it’s likely a localized issue that may be relatively simple to fix. Clogs in aerators and cartridges are easy to clean or replace. For more complex pressure drops or inconsistent flow throughout your home, it’s best to call a professional plumber at Loyalty Plumbing. Leak detection tools and pressure mapping can quickly identify the source of the problem without tearing into walls unnecessarily.

5. Consider Upgrades for Long-Term Pressure Gains

If your home is older and has original plumbing fixtures and lines, your water pressure issues may be due to outdated infrastructure in your home. Las Vegas experienced rapid growth in the 1980s and 1990s, and many homes built during this period still have their original plumbing components. Over time, galvanized steel or copper pipes corrode, narrowing the pathways through which water travels.

Modern PEX and PVC piping are more resistant to corrosion and buildup. Newer low-flow fixtures deliver strong performance while using less water, and they often maintain consistent pressure more effectively than older models.

Replacing outdated showerheads, faucets, and supply lines with pressure-optimized, water-efficient fixtures can improve flow without straining your plumbing system. These upgrades often lead to significant savings of up to 30% on your water and energy bills. Additionally, with the Southern Nevada Water Authority’s rebates and federal efficiency standards in place, upgrading often results in long-term savings on both water and energy bills.

Why Water Pressure Matters in Las Vegas

In a city where summers are long, hot, and dry, water is part of your home’s daily rhythm. Consistent water pressure makes everything more convenient, from early showers to watering the garden in the evening. When the pressure drops or surges unexpectedly, it can affect your comfort level or damage your appliances.

Regularly checking your system’s pressure, maintaining valves and pipes, and staying ahead of hard water issues will go a long way toward protecting your plumbing and improving your quality of life. Whether you’re in Summerlin, Henderson, or right off the Strip, healthy water pressure starts with proactive maintenance and expert care.

Contact a Reliable Plumbing Service

If you’re unsure about your current water pressure or want to improve performance throughout your home, now’s a great time to schedule a professional plumbing maintenance inspection with our team. With more than a decade of experience, our team focuses on being a reliable solution to Las Vegas residents like you. A quick visit today can mean fewer plumbing headaches tomorrow.

We are highly rated in the Las Vegas area as a company that makes plumbing issues a thing of the past. Keep your showers satisfying, your appliances efficient, and your home running smoothly by contacting Loyalty Plumbing today.

You probably don’t think about your plumbing until something goes wrong. A leaky faucet or slow drain might seem small at first, but those tiny issues can quietly grow into bigger, more expensive problems. That’s where regular maintenance comes into play.

A quick check today can stop a major headache tomorrow. Loyalty Plumbing in Las Vegas, NV helps homeowners spot the warning signs early so that problems don’t spiral. Whether it’s checking for hidden leaks, flushing sediment from your water heater, or making sure your pipes are in good shape, a little routine care can really pay off.

Leaks That Go Unnoticed Can Drain Your Wallet

A dripping faucet might not seem like a big deal. It makes a little noise, and maybe it leaves a few marks in the sink, but it just sits there. The thing is, even a slow drip can waste gallons of water every day. Let that go for weeks or months, and it can quietly drive your water bill way up. Then, there are the leaks you can’t see. Pipes hidden behind walls, under floors, or in crawl spaces can quietly leak for a long time without showing clear signs. By the time you notice a damp spot or moldy smell, the water has already done damage.

Regular plumbing maintenance gives you the chance to catch those leaks before they get worse. A plumber can check your system, test for pressure loss, and make small fixes while the problem is still manageable. That kind of early repair might take an hour and cost very little, but it can save you from major repairs like wall removal, pipe replacement, or mold cleanup.

Water Heaters Work Better With a Little Help

Your water heater sits in the corner of your utility room, mostly forgotten. You use it every day, but it rarely gets your attention — until the hot water runs out too fast or disappears completely. What many people don’t realize is that water heaters need upkeep to work well. Over time, sediment builds up inside the tank. Minerals from your water settle at the bottom, forming a thick layer that makes your heater work harder.

When the tank has to heat through all that gunk, it burns more energy and shortens the unit’s lifespan. You might notice higher power bills or wait longer for hot water. When a plumber stops by for a water heater service check, they can drain the tank, look at the anode rod, and make sure the valves are working right. These small steps help your water heater work better, use less energy, and last longer. The last thing you want is to lose hot water when you have guests staying with you and everyone needs to take a shower.

Pressure Problems Can Point to Bigger Issues

If your water pressure has dropped lately, that’s worth looking into. It might just be a clogged faucet aerator, which is an easy fix. But in some cases, low pressure points to more serious trouble. It could be a leak somewhere in the system, corrosion building inside old pipes, or a faulty pressure regulator. These problems can quietly damage your plumbing if left alone. Maintenance gives you a clear look at what’s causing the pressure change. Maybe your system needs flushing, or your pipes are reaching the end of their lifespan.

Either way, catching it early lets you fix the issue before it affects your daily life or turns into an expensive repair. Water pressure that’s too high can also be harmful. It puts strain on your appliances, causes pipe connections to loosen, and increases the chance of sudden bursts. Regular checks keep your system balanced so that water flows properly without putting extra stress on your pipes.

Clogged Drains Can Be More Than Just Annoying

It’s easy to dismiss a slow drain as a minor issue, often assuming it’s just a buildup of hair or soap residue. In some cases, that’s exactly what it is. However, if the problem keeps returning, it may point to a more serious issue deeper in the plumbing system that needs professional attention. Grease, debris, or even tree roots can build up inside the pipes and make draining slower each day. Store-bought drain cleaners offer a temporary fix, but they don’t clear the full blockage. Some products also damage your pipes with repeated use.

When you get your plumbing checked, a professional can use tools like a camera scope to see what’s happening below the surface. That way, the clog gets cleared the right way, not just pushed further down. Routine cleaning of your drains keeps everything flowing and helps you avoid major backups. A clogged main line can flood your home with wastewater, which is a nightmare to clean and fix. Regular maintenance clears the small stuff before it turns into a plumbing emergency.

Old Pipes Don’t Last Forever

If your home is more than 30 years old, there’s a chance your plumbing is starting to wear down. Materials like galvanized steel or polybutylene were commonly used decades ago, but they don’t hold up well in the long run. You might not see any visible issues, but the pipes could be thinning, corroding, or flaking inside. A maintenance visit lets you learn what type of pipes you have and how they’re holding up.

If replacements are needed, you can plan them before something fails. Catching that now means you can space out the work, stay within budget, and avoid emergencies like burst pipes or full repiping projects at the worst time. Replacing parts of your system when they start to weaken keeps your plumbing strong and reliable. It also protects your walls, floors, and belongings from water damage. You don’t want to wait until brown water comes out of your tap or a leak floods the basement.

Hidden Moisture Can Lead to Bigger Problems

Sometimes, water damage starts small and spreads before you even notice. You might see a slight stain on the ceiling, a musty smell near a wall, or warping around the baseboards. These clues often point to a slow leak somewhere inside of your home. A routine plumbing check can help you catch that leak before it grows. A plumber can use moisture sensors, thermal imaging, or pressure tests to track down trouble that hasn’t surfaced yet.

Stopping that water early keeps your house safer. It also prevents mold from taking root. Mold removal gets expensive quickly, and once it spreads into walls or ceilings, you’re looking at major cleanup and repairs. Regular plumbing inspections reduce the risk of long-term damage like this. You’ll also get peace of mind knowing that what’s behind the walls isn’t working against you. A dry home is a healthy home, and it starts with small fixes you can make early.

Toilets and Faucets Can Leak Without Making Noise

Most people think they’d hear a leak, but that’s not always the case. A running toilet, for example, might not make much noise but can still waste dozens of gallons a day. Faucet leaks that drip straight down the drain are easy to overlook. Maintenance checks include testing these fixtures and looking for wear that’s easy to miss. Replacing a worn flapper or tightening a valve might take 10 minutes, but it can stop months of wasted water.

It’s not just about the water bill, either. Small leaks can leave mineral deposits, cause staining, or lead to corrosion around fixtures. That damage builds quietly and can eventually mean replacing the faucet or parts of the sink area. Keeping those small parts in good shape makes everything last longer and saves money on more expensive replacements. It’s a simple way to stay ahead of problems you might not even see coming.

Get a Maintenance Check Today

You don’t need to wait for a burst pipe or a sky-high water bill to start taking your plumbing seriously. Regular maintenance can keep things in check and save time, money, and frustration down the line. If you’re ready to catch small problems before they grow, schedule a service visit with Loyalty Plumbing in Las Vegas today. Ask about our Buddy Benefits Club to save money on plumbing tune-ups and get bonus perks!

Tag: plumbing maintenance

Top 5 Ways to Maintain Healthy Water Pressure in Your Home